News to Combined Cycle CHP Stations SYSTEM HUTTER

Combined Cycle CHP Station SYSTEM HUTTER UPM Nordland Papier

Process Description:

• Combined Gas Turbine- and Steam Turbine CHP Station according to the SYSTEM HUTTER process
  (Combined Cycle CHP Station SYSTEM HUTTER)
• 2 Gas Turbo Sets each on 1 radiation-type SYSTEM HUTTER Steam Generator and 1 common back-pressure Steam Turbo Set
   

Technical Main Data:

• Nominal Total Electrical Capacity ISO = 154 MW
  Nominal Live Steam Massflow = 2 x 200 t/h
  Nominal Electrical Power Output Gas Turbo Set ISO = 2 x 42 MW
  Nominal Electrical Power Output Steam Turbo Set = 70 MW
  Fuel Utilisation Factor > 90%
   

Project Scope:

• Feasibility Study, Permit Application and Pre-Engineering about a complete CHP Station with new power plant building, water treatment- and condensate polishing plant, natural gas pipeline with natural gas hand-over station, gas turbines, steam generator plants with feedwater systems, exhaust- / flue gas system, steam turbine, steam turbine bypass system, auxiliary condenser, condensate system, pipings & valves, high- and medium voltage switchyards, further electrical systems, instrumentation, distributed control system with tie-in of existing distributed control system, steel structure & walkways, tie-in of existing steam generators, new process steam system up to upsteam the paper machines
   

HUTTER FREI POWER Scope of Services:

• Conceptual Engineering with comparison and evaluation of power station variants between Gas Turbines with Heat Recovery Steam Generators and CHP Stations SYSTEM HUTTER with radiation-type SYSTEM HUTTER Steam Generator
• After economic calculations and concept decision by UPM for the CHP Station SYSTEM HUTTER:
  Design, Pre-Engineering, Arrangement Planning, P&I Diagrams, Single Line Diagrams, Plant Operation- and Control Concept, Heat Balances, Electrical Calculations with earth fault- and load case calculations, preparation of Control System Architecture, reparation of Inquiry Specifications, support & participation in Supplier Negotations of time-critical purchasing packages, Supplier Evaluations, determination of Overall Project Investment Cost with cash-flow planning, Overall Time Schedule, supply of BIMSCHV-permitting-forms, support for the various permitting Expert Assessments.
  The Project Execution (-Realisation) will be started after the UPM release of the Project Investment Application.
   

Customer:

• UPM Nordland Papier, Dörpen, Germany
   

Combined Cycle CHP Station UPM Schongau

Project Scope:

• Parameter Study about the Extension of the existing Steam Turbine CHP Station with a new Gas Turbine Set and Steam Generator plant with the necessary auxiliary systems
   

HUTTER FREI POWER Scope of Services:

• Conceptual Engineering with comparison and evaluation of different variants between Gas Turbine with Heat Recovery Steam Generators and CHP Stations SYSTEM HUTTER with radiation-type SYSTEM HUTTER Steam Generators
• Design, Feasibility Study, Economic Calculations
   

Customer:

• UPM Schongau, Schongau, Germany