Products

HUTTER FREI POWER is specialised in planning, design, engineering and supply of high-grade turbine-based Combined Heat and Power Stations, Thermal Power Stations, Heating Plants and Thermal Residue-to-Energy integrated in CHP Power Stations,
and as Consultant, General Planer and EPCM-Contractor of large Power Stations or entire Waste Incineration Plants.
The products of HUTTER FREI POWER serve with highest fuel utilisation factors and time-reliabilities, most extended operational flexibilities and are enabling a low emissioning energy supply.
With the aim of efficiency increase, that means fuel savings, and of emission reductions, innovative technologies were created, which are the basis of our products.

• Rotary Kiln Delacquering Plants for thermal Recycling

  Intended purpose of the rotary kiln delacquering plant is the delacquering and removal of organic compounds and contaminants from aluminium parts. The delacquered aluminium parts are fed into the melting furnace for recycling.

  Examples for useable feedstock materials are used beverage cans (UBC), window profiles, parts from automotive industry, heat exchangers and other aluminium parts. The shredded material can come from the waste stream or from deposits, and consequently don’t need to be purchased from the production process or can cycle.

• Combined Cycle CHP Stations SYSTEM HUTTER

  HUTTER FREI POWER delivers mainly Combined Cycle CHP Stations according to the SYSTEM HUTTER process, that means Combined Gas Turbine and Steam Turbine CHP Stations with radiation-type SYSTEM HUTTER Steam Generators, which achieve total efficiencies of up to 94 %.
  The Combined Cycle CHP Station SYSTEM HUTTER was developed by Mr. Friedrich Hutter for the simultaneous generation of useful steam and electricity. We have patent rights on a low emission technology of the boiler firing and in the steam generator configuration to achieve highest total efficiencies, and consequently fuel savings and reduction of CO2 emissions.

• Gas Turbine CHP Stations with Heat Recovery Steam Generators

  If heat is used in form of hot water or in case of ratios "electricity to fuel price" above 3.6, HUTTER FREI POWER delivers Gas Turbine CHP Stations with Heat Recovery Steam Generators, which can have an economic advantage.

• Steam Turbine Combined Heat & Power Stations

  If Gas Turbine CHP Stations in some cases are not the economically optimal power plant types or if Gas Turbines can not be used, HUTTER FREI POWER delivers Steam Turbine CHP Stations with different fuels, for example gas-, oil- or coal-fired.

• Thermal Power Stations

  For all applications either with pure Electricity need or with Electricity need with a relatively low Useful Heat need, HUTTER FREI POWER delivers Thermal Power Stations up to medium plant size with different technologies (Combined Cycle Power Stations, Gas Turbine Power Stations, Steam Turbine Power Stations) and dependant on the technology with different fuels as for example gas, oil or coal.

• Heating Plants & Steam Generators

  HUTTER FREI POWER is specialised in design, construction and delivery of radiation-type Steam Generators as well as of Heat Recovery Steam Generators (Heating Plants & Steam Generators), which can be equipped with different fuel systems depending on the boundary conditions.

• Residue Waste to Energy Plants

  HUTTER FREI POWER delivers Residue Waste to Energy Plants according to the specially developed concept of bubbling fluidised-bed combustion for the wastes and rejects of the paper- and cardboard-production for reduction of the emissions, increase of the operation time between revisions and minimise corrosion.

• Waste Incineration Plants

  In case of Waste Incineration Plants HUTTER FREI POWER acts as Planning and Executing Eengineer and delivers the energy part with water steam cycle and power generation. The waste firing and flue gas cleaning is not in the HUTTER FREI POWER scope of supply.

• Consulting & Engineering  (for large Power Stations and entire Waster-to-Energy Plants)

  For projects to build Power Plants, which are not in our hardware delivery program, HUTTER FREI POWER acts as Consultant, General Planer, EPCM-Contractor.
  In the consulting phase, HUTTER FREI POWER Services contain project development studies, preliminary studies, feasibility studies as well as Pre-Engineering contracts.
  In the execution (realisation) phase, our Services contain project management, planning, design, engineering, procurement, supplier control, site management, erection management, quality control of erection, commissioning and acceptance test measurements of plants.

• Process Automation & Distributed Control Systems

  Preparation of all process input documents for the Process Automation as for example process function plans, step sequence diagrams, control schematics, logic diagrams, system descriptions, failure reactions and maintenance supervision of the plant.
  For Combined Cycle CHP Stations SYSTEM HUTTER, HUTTER FREI POWER delivers the entire distributed control systems.